Shenzhen Veikong Electric Co., Ltd.
Shenzhen Veikong Electric Co., Ltd.
Add to Cart
MPPT 99% Solar pump inverter 220v 2.2kw 3hp inverter for ac submerged pump
Electrical Specifications and Power degree
| 220V | 380V | |
| Max input DC voltage | 450V | 810V |
| DC voltage range | 150~450VDC | 300~810VDC |
| Normal working DC voltage | 260V-400V | 400V-650V |
| Recommended input mppt voltage | 330V | 550V |
| MPPT efficiency | >99% | |
| Rated output voltage | 1/3-phase 220VAC | 3-phase 380-480VAC |
| Output frequency range | 50/60Hz | |
| Max efficiency of the machine | 99% | |
| Power range | 220v 0.75kw to 75kw, 380v 1.5kw-160kw | |
| Cooling method | Air cooling | |
| Protection degree | IP20/IP65 | |
| Altitude | Below 1000m; above 1% for every additional 100m. | |
| Standard | CE/ROHS | |
Noted: We suggest solar panel power should be 1.3-1.4 times higher than solar pump power ,
And solar pump inverter power should be higher level than solar pump.
When solar pump distance to inverter higher than 100m,
It should be equipped with Output reactor or higher level power inverter.
For Solar panel,total VOC less than Maximum DC voltage of inverter and Solar panel vmp is recommend
530V for 380V pump and 305V for 220V pump.
Advantages:
1, Built in EMC C3 filter, use newest software and unique design.
2, Suitable for single phase pump, three phase pump. Permanent magnet synchronous pump
3, Support PV input and AC input at same time, make system work 24 hours.
4, Built-in MPPT technology with up to 99.9% efficiency.
5, With water level detection function, automatically regulate the pump flow to prevent dryrunning
6, Water full protection function and dry runing protection
7, Support optional LCD keypad, and optional GPRS moudule, it is easy to operate and monitor system situation
8, Built-in soft start, overvoltage, overload, undervoltage and weak sunshine protection function
6. How to make the water pump system work without sunshine?
Usually, solar PV water pump system can meet the needs of pumping water.
If there is no sunshine, the system will not work. But out inverter could also support AC input. So, connect the power grid or diesel power generation to the inverter, the pumping system will work. If necessary, keep switch and interface locations during the system design