Shenzhen Veikong Electric Co., Ltd.
Shenzhen Veikong Electric Co., Ltd.
Add to Cart
1.5KW 2.2KW 4KW Solar Inverter Single Phase Input Single Phase Output
1.5KW 2.2KW 4KW Single Phase Input Single Phase Output Solar Pump Inverter
Product Feature:
1. Support Maximum MPPT efficiency 99%
2. Special solar MPPT mode and PID mode
3. Support GPRS remote control
4. Support IM and PM pump
5. Support dry run protection
Eletrical Specification
| 220V | 380V | |
| Max input DC voltage | 450V | 810V |
| DC voltage range | 150~450VDC | 250~810VDC |
| Recommended input mppt voltage | 305V | 530V |
| MPPT efficiency | >99% | |
| Rated output voltage | 1/3-phase 220VAC | 3-phase 380-480VAC |
| Output frequency range | 50/60Hz | |
| Max efficiency of the machine | 99% | |
| Ambient temperature range | -10 °C~50 °C, derating if the temperature is above 40 °C | |
| Cooling method | Air cooling | |
| Protection degree | IP20/IP21 |
| Altitude | Below 1000m; above 1% for every additional 100m. |
| Standard | CE/ROHS |
Product Model
| Drive model | Max DC input current (A) | Rated output current (A) | Applicable water pump (kW) |
| VFD500M-40T00075-PV | 4.2 | 2.5 | 0.75 |
| VFD500M-40T00150-PV | 6.1 | 3.7 | 1.5 |
| VFD500M-40T00220-PV | 7.1 | 5 | 2.2 |
| VFD500M-40T00400-PV | 16.5 | 9.4 | 4 |
| VFD500M-40T00550-PV | 23.9 | 13 | 5.5 |
| VFD500M-40T00750-PV | 30.6 | 17 | 7.5 |
| 220V single phase or three phase level | |||
| VFD500M-20T00075-PV | 6.7 | 4.5 | 0.75 |
| VFD500M-20T00150-PV | 9.9 | 7 | 1.5 |
| VFD500M-20T00220-PV | 14.1 | 11 | 2.2 |
| VFD500M-20T00400-PV | 22.6 | 17 | 4 |
Product Details
FAQ:
1. How to use a float in the water tank to stop the pump if the tank is full?
Use float switch to short DI 1 and com.
2.1 How to set minimum frequency 25hz and maximum 50HZ?
Set P47.05=25HZ and 47.06 to some time and 47.07 to some time
3. 1 If pump is 60HZ frequency ,how to set max frequency?
Notice:If your motor rated frequency is 60HZ you should set P01.06=P01.08=P11.05=60HZ.